The empty honeycomb packing cases are put in manual as pile in the equipment. A gripper takes one empty packing case off the pile and places it on a transport belt. Every comb of the honeycomb packing case is filled with a part. At the end of the transport strip a gripper piles up the filled honeycomb packing cases. Then the filled cases can be taken away manual as a pile.

Dimensions of the feeding device:

Width: 1100 mm
Depth: 1000 mm
Height: 1300 mm

Dimension of the honeycomb packing case: max 300 x 200 mm
Cycle time of feeding: max. 60 cycles / min.
Height of the piles: max. 580 mm

The empty honeycomb packing cases are put in manual as pile in the equipment. A gripper takes one empty packing case off the pile and places it on a transport belt. Every comb of the honeycomb packing case is filled with a part. At the end of the transport strip a gripper piles up the filled honeycomb packing cases. Then the filled cases can be taken away manual as a pile.

Dimensions of the feeding device:
Width: 2270 mm
Depth: 1400 mm
Height: 1750 mm

Dimension of the honeycomb packing case: max 600 x 400 mm
Cycle time of feeding: max. 60 cycles / min.
Height of the piles: max. 1000 mm